V.1.1 STL files
1 x Chassis Cover (best if printed with the bottom of the cover on the baseplate)
1 x Chassis Case (with IMU housing) (best print results if the top of the chassis is flush with the baseplate)
4 x Femur
4 x Tibia (print with flat edge of the tibia lies flush to the baseplate, suspending the point of the leg)
1 x Chassis Case (with IMU housing) (best print results if the top of the chassis is flush with the baseplate)
4 x Femur
4 x Tibia (print with flat edge of the tibia lies flush to the baseplate, suspending the point of the leg)
|
|
|
|
